• Batch pulper that operates with high consistency pulp producing vigorous rubbing among fibres giving rise to a shive-free pulp.
• Essential for de-inking installations with a high degree of ink separation and favourable consumption of chemical products and steam.
• Successful applications in W.S., cellulose and O.C.C.

• Pulper for continuous pulping or batch pulping at consistencies of between 3 and 8%.
  
• Rotor designed for high pumping and disintegration performance with favourable energy consumption
  
• It is used for the disintegration of waste paper, cellulose and installations for the treatment of broke resulting from the manufacture of paper and converting.

• An auxiliary pulper which is applied to pulpers used for batch pulping or continuous pulping of waste paper, increases efficiency up to between 20 and 25% and extracts pollutants intact.
  
• It does away with the need to clean the pulper, stabilises the consistency of the discharge and saves on energy.

• A highly effective thick pulp purifier used for separating metals, stones, thick grain sand.
  
• It is usually positioned at the beginning of the pulp circuit and protects the deflakers and refiners as well as the screen sieves thus saving on the cost of spare parts.
  
• It is able to operate with pulp consistencies of between 1.5 and 5%.

• Thanks to the sheet metal used for screening, perforated with cylindrical-conical holes and their high vibration frequency, the vibrating sieves are highly effective.
  
• They can operate at variable concentrations and flows.
  
• A very good evacuation of rejects is guaranteed.
  
• The use of a vibrating sieve is recommended whenever it is necessary to recover the good fibres which are mixed with the rejects.

Uniscreen

• This screen extracts pollutants extremely effectively from consistencies of between 2 and 3.5% with a weak flow of pulp in that of the rejects.
  
• It is very stable when operating and does not clog. It can be equipped with perforated or grooved sieves.

Multinet

• Double screen with an initial chamber with a perforated grill for preliminary screening as well as a light deflaking and a second chamber equipped with a grooved sieve for fine screening.
  
• An input consistency of up to 5% and an output consistency of up to 3.5%.
  
• It makes the pulp circuit simpler and is a great saving on energy.

Tailnet

• Very effective last stage screen with automatic washing cycles preventing loss of fibres.
  
• Can be equipped with a perforated grille and even a deflaker and with a grooved sieve.

Flottank

• A highly efficient de-inking cell where 1 or 2 cells are sufficient to obtain high levels of whiteness.
  
• De-inking by suction with low fibre loss.
  
• Secondary cells are not necessary.
  
• Saving on installation space and low energy consumption.

• Thickening from an input consistency of 1,5% to 4% without a press roll and up to 6% when using a press roll.
  
• Low fibre content in strained water.

• Can be used with all types of pulps and has an excellent thickening and cleaning effect working with input concentrations from 2% and output concentrations of up to 16%.
  
• Stable performance, no clogging and needs little installation space.

• Double sieve draining area and pressure area (high pressure) in two parts.
  
• Double casing.
  
• Worm screw with anti-wear and tear coils designed in accordance with application.
  
• Pneumatic pressure regulation system.
  
• Construction: the parts in contact with the product are manufactured in stainless steel.
• High resistance.

LICAR’s heat treatment system makes it possible to obtain a highly homogeneous pulp from recycled paper thanks to:

• Total dispersion of wax, paraffin, inks, pigments etc., by means of a combination of a mechanical action and a temperature of between 60ºC and 100ºC.
  
• Dispersion and separation of hot-melts.
  
• Subsequent separation of glues by means of changes in temperature.
  
• Combined friction and temperature actions resulting in the fibrillation of moisture resistant paper.

• It is installed in the impurity discharge point of the auxiliary pulpers (Netpulper and Dumpulper).
  
• The action of a hydraulic press dehydrates the pollutants, thus reducing the volume, and transports them away from the area where the pollutants from the pulper are discharged.

• For storage tanks, mixing and machine head.
  
• Wide range of diameters.
  
• Low energy consumption.

• Highly efficient in the separation of heavy and light impurities.
  
• Various cyclonic purifiers are installed and they are highly efficient in the separation of impurities with no fibre content in the rejects.

Ultranet

• Especially for machine head circuits before the input box.
  
• It works centripetally with an extremely low pulse level.
  
• It can be equipped with sieves with holes or grooves.
  
• It can also be used in pulp preparation circuits for fine screening.

• Pulper for disintegrating paper when there are breaks in Presses, Size-Press.
  
• The pulper is installed at the bottom of the machine.